Total Alkilinity Plus 1Kg

Description:

Total Alkalinity Increase is used to maintain the alkalinity at the desired level. Total Alkalinity should be regularly monitored and maintained between 80 and 140 ppm (mg/L) Low alkalinity causes fluctuations of the pH, high total alkalinity causes the hot tub's water to resist pH changes due to “Overbuffering” and can affect water clarity.

Instructions for Use:

• The Total Alkalinity (T.A.) of pool and spa water should be maintained between 80 and 140ppm (parts per million). Add Total Alkalinity Plus when Total Alkalinity of water needs to be increased.
• Use a Test Kit to determine Total Alkalinity of water.
• Add 16g (2 heaped teaspoons) per 1000 litres to increase Total Alkalinity by approximately 10 ppm. If your pool holds 40,000 litres of water you will need to add 640g of Total Alkalinity Plus to increase the T.A. by 10 ppm.
• Always pre-dissolve in a plastic bucket full of water before adding to pool water.
• Ensure that circulation system is running before pouring the solution into water immediately above return inlet.
• Never add product when pool/spa is being used. Allow 15 minutes before using pool/spa.
• After 24 hours test and repeat dose if required.

General Precautions:

Never mix with any other chemicals including cleaning products, weedkillers and chlorine products, as a dangerous reaction may occur.Always handle products in a well ventilated area, preferably outdoors. When pre-dissolving products always use a clean plastic container. If in doubt wash thoroughly before use. When dissolving products always add product to water and not vice versa. Use only 100g of product per 10 litres of water each treatment. Repeat treatments if required.Always wash hands thoroughly after handling pool chemicals. Store in a cool dry place. Ensure chemicals do not become damp in storage. Instructions and dosages given are a guide for most effective use.

SAFETY

DANGER: NEVER MIX HOT TUB CHEMICALS TOGETHER
Always add chemicals to water and not water to chemicals