Non Chlorine Shock Granules 1Kg

Description:

Non-Chlorine Shock should be used to prevent your hot tubs water from deteriorating. When added to your hot tubon a fortnightly basis you will minimise unpleasant odours and eye burn. Non-Chlorine Shock oxidises and removes organic contamination from water without increasing chlorine levels. It also reduces unpleasant chloramines. Non-Chlorine is the ideal shock treatment for chlorinated or brominated water, but should not be used as an alternative to your day-to-day sanitiser.

Instructions for Use:

• Make sure that the hot tub is not being used when adding this product.
• Only add when hot tub circulation is running.
• For spas add at a rate of 15g per 1000 litres (220 gallons).
• Always pre-dissolve the product in a clean plastic bucket of hot tub water before adding to hot tub.
• Wait at least 15 minutes before using the hot tub.

General Precautions:

Never mix with any other chemicals including cleaning products, weedkillers and chlorine products, as a dangerous reaction may occur.Always handle products in a well ventilated area, preferably outdoors. When pre-dissolving products always use a clean plastic container. If in doubt wash thoroughly before use. When dissolving products always add product to water and not vice versa. Use only 100g of product per 10 litres of water each treatment. Repeat treatments if required.Always wash hands thoroughly after handling pool chemicals. Store in a cool dry place. Ensure chemicals do not become damp in storage. Instructions and dosages given are a guide for most effective use.

SAFETY

DANGER: NEVER MIX HOT TUB CHEMICALS TOGETHER
Always add chemicals to water and not water to chemicals